Still bagging

I'm still bagging panels, but hope to finish the last one next week.

You're fired!

Today I bought a proper vacuüm pump to replace the one I built from a compressor of a scrap fridge. The home-built pump was not nearly powerful enough for vacuum-bagging the larger panels of the main hull.

and....YOU'RE HIRED!

Second float outside

Today we took the second float outside. The floats will for the time being be stored on a trailer under plastic.

Ready?

I think it's ready enough. Still need to touch up a few small spots, but I'll do that when I paint the boat. For now I'll leave the hull primed and sanded 180 grit.

Float 2 primed

I primed float no. 2 using a low-pressure-high-volume paint spray machine. It gave a much smoother finish than using a roller like I did on float no. 1. I sprayed two normal coats and one colored coat as a guide coat. First photo is the float without primer, the second one is after primer.

Epoxy coating float 2

I tried a tip I found surfing the internet: coating the faired hull with two layers epoxy (wet-in-wet) to fill all the pinholes and small imperfections. My impression after sanding the layers down is it may have some possitive effect, but not enough to make up for all the extra work. I would'nt recommend it (maybe except for people who aspire the ultimate finish - I'm not one of them).

Dust, dust, dust

I'm doing a lot of sanding. It's amazing how much dust gets into the air and on and in everything in the room. And in my nose and mouth. After working without protection one day I was coughing and sneezing white slime and decided it was time to be sensible and ALWAYS wear a dust mask. Glad I'm almost done fairing.


Pffffffffffffff.....
READY