maandag 21 januari 2008

Main hatch flanges + hull supports

Laminating the flange for the 'doorway' (don't know the proper word); four layers A-cloth. I used some scrap wood + clamps to keep the cloth bent around the former.
This worked well....
Flange roughly cut.
Hull is standing on two supports made of scrap MDF with some tube-insulation; works really well. I'll have to get the hull leveled yet and will probablye use an car-jack to fine tune the supports.
Picture to get an idea of the size of the hatch.
I'm still waiting for the Beam Mounts. They should arrive this week and I think it will take about a week to install them.

Geen opmerkingen: